Polydrain — Swan Plastics

Name: Polydrain
Brand: Swan Plastics

Polydrain Range

15 fittings.
One push-fit system.

Bends, junctions, sockets, gullies and rodding eyes — the complete Polydrain 110mm and 160mm range, including Plumbeasy-branded sockets and end caps that join the same system.

Push-fit installation

Faster to lay.
Built to last.

No solvent, no cure time

Each joint seals on a rubber ring alone, so runs can be tested and backfilled the same day — no waiting for solvent cement to cure before the trench closes.

Half the install time

A push-fit joint goes together by hand, cutting labour on every bend, junction and socket compared with solvent-welded or cement-jointed systems.

Never rusts or scales

Polypropylene doesn’t corrode, pit or scale the way metal fittings can, so joints stay watertight for decades in wet ground.

Moves with the ground

PP flexes slightly under load, absorbing minor ground settlement and thermal movement that would crack a rigid, solvent-welded joint.

Demountable when needed

Unlike a solvent weld, a push-fit joint can be pulled apart to correct alignment or replace a fitting — without cutting into the pipe run.

Resists chemical attack

Polydrain fittings shrug off the acids, alkalis and greases found in underground effluent, holding their seal well beyond a standard PVC joint.

PUB110-22 110mm x 22.5° UG Bend Plain

Colour: Beige 110mm

PUB110-45 110mm x 45° UG Bend Plain

Colour: Beige 110mm

PUB110-90 110mm x 90° UG Bend Plain

Colour: Beige 110mm

PUJ110-45PL 110mm x 45° UG Junction Plain

Colour: Beige 110mm

PUJ110-45U 110mm x 45° UG Junction Universal

Colour: Beige 110mm

PUJ110-90PL 110mm x 90° UG Junction Plain

Colour: Beige 110mm

PUKS110 110mm UG Kimberley Socket

Colour: Beige 110mm

PUDS110 110mm UG Universal Socket

Colour: Beige 110mm

PURE110-45 110mm x 45° UG Rodding Eye Oval

Colour: Beige 110mm

PUGP 110mm UG Gully P Trap

Colour: Beige 110mm

PUGH 110mm Gully Head & Grid

Colour: Sand 110mm

PUGG 190mm Gully Grid Only

Colour: White 190mm

PUJ160X110 160mm x 110mm x 45° UG Junction Plain

Colour: Beige 160x110mm

USS110 110mm UG Single Socket (Plumbeasy)

Colour: Beige 110mm

PUEC110 110mm UG End Cap Female (Plumbeasy)

Colour: Beige 110mm

Get A Quote →

Common questions

Frequently asked
questions.

Straight answers about this range's specs, certification and applications.

What is Polydrain used for?

Polydrain is Swan Plastics' polypropylene (PP) fittings range for below-ground waste systems, connected with push-fit joints.

What sizes does Polydrain come in?

Polydrain fittings are available in 110mm and 160mm.

What material is Polydrain made from?

Polydrain fittings are made from polypropylene (PP).

How do Polydrain fittings connect?

Polydrain uses push-fit joints, which don't require solvent welding, for quicker assembly of underground drainage runs.

What's the difference between Polydrain and Durodrain?

Polydrain is our polypropylene (PP) push-fit underground fitting range (110–160mm). Durodrain is our uPVC pipe and fitting range for underground drainage (Ø110–250mm), certified to SANS 791 and SANS 1601.

Underground
Fittings

15 fittings.
One push-fit system.

Faster to lay.
Built to last.

No solvent, no cure time

Half the install time

Never rusts or scales

Moves with the ground

Demountable when needed

Resists chemical attack

Frequently asked
questions.

Need a spec
for this range?

UndergroundFittings

15 fittings.One push-fit system.

Frequently askedquestions.

Need a specfor this range?

Underground
Fittings

15 fittings.
One push-fit system.

Frequently asked
questions.

Need a spec
for this range?